What are the differences and similarities between the waterjet and laser cutting methods? If you want to cut materials, there are many ways to achieve it, using sawing, as well as air cutting, etc., can achieve the cutting of various materials. But these cutting methods are not perfect, so waterjet cutting and laser pointer cutting were invented later, which are also widely used cutting methods. It turns out that these two methods are also the most effective cutting solutions in the industry.
But people have not stopped looking for better cutting methods, such as the processing of some precision metal parts, or the cutting of some new materials. It is necessary to find new cutting methods, and then develop a unique waterjet laser cutting technology. . First, let’s take a look at the differences and similarities between the waterjet and laser cutting methods.
The water jet is to use water as a knife. The water is pressurized to ultra-high pressure in the container, and then a high-pressure water stream is ejected through a very small nozzle to realize the cutting of the material; in order to increase the cutting ability, some garnet sand will be used. Adding abrasives such as diamond to water is a widely used cutting method now.
Laser cutting is to create a high-power laser beam through a machine, and then irradiate the material to be cut. The high temperature generated by the laser will melt or vaporize the irradiated material, thereby realizing the cutting of the material. Waterjet, there are almost no restrictions on the materials that can be cut. Waterjet cutting will not cause the material to generate heat, thereby avoiding the melting, warping, bending, and burning of the material being cut; common material types for waterjet cutting Including plastic, rubber, stone, ceramic tile, stainless steel, and other metals.
Lasers, lasers can cut a wider range of metals, including stainless steel and carbon steel, as well as aluminum and a variety of alloys. Some green laser pointer can cut through non-conductive materials such as wood, glass or plastic, but the heat generated by the laser can affect some Metal products have an impact. Waterjet: There is no limit to the thickness of the waterjet cutting material. The main thing depends on the strength of the water jet. The higher the pressure, the thicker the material can be cut.