There is a new solution for this kind of laser pointer glass. The solid-state ultraviolet laser is also in the ultraviolet band. The substrate glass has very good penetration. The glass process that everyone needs in the OLED industry at this stage, high-power ultraviolet laser, we The ability to make high-power lasers is no longer a problem. UV lasers do not require follow-up maintenance and do not pollute the environment. Excimer lasers require inert gas. The integration of UV laser systems will bring more convenience.
Excimer lasers have thousands of watts, and the overall efficiency is no less than the application of excimer lasers in glass. Both solutions can be done in the next stage. This is based on what kind of thinking the customer is based on. Our equipment is What is the source of the foreign monopoly? The main reason is that lasers are provided by related companies in the United States. For system integration, we also have this ability. It is already a very mature technology in laser applications. Ultraviolet lasers are used on glass, and it is now advancing work in laser applications. High-power ultraviolet lasers can also be very effective to meet industry needs. How to complete the annealing process, compare the differences between the two, high energy, low speed, low speed and high energy, system maintenance and overall cost are very different.
Glass cutting, we use the glass cutting process involved in the mobile phone application environment. green laser pointer cutting can save the manual link. If the edge is wrapped, the glass is not outside, and there is no need for the following processes at all. If the glass is to be outside, just Lead angle is needed. Now I heard that Corning’s German company is doing some glass cutting experiments in BOE. Corning’s German company bought a Lithuanian laser cutting patent. This patent is infringed for domestic use. The advantage of our laser cutting glass is regardless of Either tempered glass or non-strengthened glass can be cut equally.
At this stage, there are three mature products in the industry application. The first is to use small and medium-sized ultra-fast laser processing, mainly the lens cover and the fingerprint button of the mobile phone. It has been maturely promoted and applied. Based on the improvement of processing efficiency, High-power ultra-fast lasers have made dual-head processing equipment, which has been effectively promoted and applied in the mobile phone industry. The glass cutting equipment that is now made is based on the G6 generation. When the photovoltaic industry was originally used, the mature technology was in the G6 generation. Therefore, glass cutting is done on the basis of the G6 generation.
This can cut a complete panel. Based on this technology, the cutting of flexible screens is the same. To promote the introduction of core technologies, I personally feel that there should be a complete solution for glass and sapphire material processing, whether it is internal or Externally, for the cutting of large panels, our ability has been fully achieved, and we are still doing a research and development work, welding between glass and glass, this technology will also have application prospects in the future, and there is a laser for glass. There will also be some development directions for polishing.
If the next generation of glass double panels and glass panels are mass-produced, everyone will not think it is fun to use a single glass panel. Therefore, the glass panel processing involves the mutual promotion of 3D texture and functional glass. These tasks are currently underway. This is Make some contributions to the next step of the industry for better development. The core technology developed at this stage, I also believe that 70% to 80% of the equipment involved in the panel industry is monopolized by foreign countries. I believe that laser equipment is also the first to enter the industry for service..